05.30.09
Oh Man! Just When It Looked Within Reach…
Check this out. The picture your looking at is of the plug which plugs into the DMOC (remember the one with all those wires), Notice pin 3 does not have a wire in it. Imagine my surprise when the schematic called for the wire from pin three! anyway we’ve come a very long way on the car since the 15th but I will not be able to reach my goal of being “operational” by the 31st. I sent the old one back today (wire harness) and should receive a replacement next week. At least we were able to hook up the high voltage system and check the voltages at my test points. I’ve also included a picture of the relay board we designed.
